Do you have an idea for an electronic product, the next must-have gadget, music or video system, time saver, or greatest problem-solving device that was ever invented? Even if you have the electronics product design expertise available, there are a number of tasks that you must complete and issues that you must resolve before you have an actual product design that can be produced, marketed, and sold. Once you have completed a product specification document and a marketing study, you should be prepared to have the product electronics and packaging design processes begun so that a prototype unit can be assembled and tested.
One of the first choices that must be made in the electronics design is which microprocessor or microcontroller architecture will be utilized if your product idea requires processing capability. Most microprocessor or microcontroller devices are available in a variety of configurations of internal memory sizes with some including non-volatile Flash memory for program storage, quantity and types of input and output pins, package types for surface mount or thru-hole applications, clock speeds, and interfaces that are supported by the processor without having to add additional devices.
Once a microprocessor or microcontroller family is selected, additional decisions must be made on which system clock frequency to use, how much processor and system memory will be required for the application, and how the software development processes are to be supported. The choice of processor architecture must consider the available software development and testing tools and the software design resources that will be required for your product's software/firmware design. Additional decisions must be made on how the software/firmware will be loaded into the processor's memory during the manufacturing process. Will the design allow the finished product to accept field or user initiated software/firmware upgrades, or will the product be a one-time programmable unit?
Before the processor portion of the design is completed, you must also define which types of interfaces to external systems will be required (serial port, parallel port, USB, Ethernet, wireless connection such as 802.11x or Bluetooth, infrared, etc.) and the minimum interface bandwidth rates required. All of these factors will play a role in choosing the best processor product to use in your design application. Some microprocessor/microcontroller product examples that you can research are the MicroChip PAL series and the family of products from Atmel as both of these suppliers provide some very powerful but low cost processor solutions.
The completed design will include a power supply section that will provide the voltage and current levels required by the design's components. Input power options could include plugging the unit into a 120 VAC outlet and converting the AC voltage to the appropriate regulated DC voltage levels internally as part of the power supply design. You could also choose to use an external power adapter that converts 120 VAC to a DC voltage level and then regulates this incoming DC voltage level to the level required by the design. A third option would be to have the product powered by batteries. If your product is to be battery powered, in addition to defining the battery technology and the number of amp hours of power storage in the batteries, you should also consider if a rechargeable battery design or an end user replaceable battery design is best for the product application and pricing.
Once the electronics design and the printed circuit board design are completed, the mechanical packaging and external enclosure designs can be finalized and the initial software development can be completed. Now it is time to have a prototype unit assembled and tested and decisions must be made regarding the manufacturing of the initial prototype units. Choices include ordering all of the components and assembling the prototype product in-house if you have the assembly expertise, subcontracting the prototyping process to a domestic contract electronics manufacturing company, or subcontracting the prototyping process to a contract electronics manufacturing company located off shore.
Another important factor to consider in this process of evaluating electronics manufacturing service providers would be the design assistance that they may be able to provide throughout the process of developing the product. Services such as electronics design and printed circuit board layout design, component selection and procurement process with assistance in multi-sourcing components, enclosure design, mechanical packaging design, and providing production capability from prototyping to low volume to high volume could all be of immense help to you. In addition, a contract electronics manufacturer may also provide suggestions to improve the manufacturability, lower component costs, and improve the product's reliability. Be sure to have an appropriate Non-Disclosure Agreement in place with any and all parties that are involved in this process to protect your intellectual property.
You must also define how will the manufactured product is to be tested and packaged. Once the product has been prototyped and tested successfully, it is important to determine the quantity of units to be manufactured for the initial production run and for volume manufacturing levels. You must also understand how many levels of distribution the product go through (with each level taking a cut of the margins) before it gets in front of a consumer to purchase.
If you are an inventor or have a great electronic product idea, I don't want to discourage you, but you must consider all of these activities and their associated costs before you commit to the thousands of dollars of expenses required for designing and prototyping your product idea. For instance, you should be prepared at a minimum to either perform yourself or to subcontract the completion of the following tasks: